WF 4.1 - Tool Milling Machine

• Automatic feeds on all 3 axis
• Outer arbor support for horizontal milling
• Heavily ribbed cast-iron machine stand ensures maximum static and dynamic rigidity
• Optimum layout of operating controls on the right-hand side
• Vertical head quill for drilling, with hand lever feed
• Quill stroke 3.2"
• Central lubrication
• Hardened guide ways
• Chip collector pan

3-axis position indicator

• More accuracy
• Lower error rate
• Increased productivity
• Resulting in valuable time savings
• For increased productivity
• Easy to read display
• Operator-specific features
• Convenient keyboard layout
• Resolution: 0.0004 / 0.0002"
• Default coordinates
• Axis position is maintained when display is turned off
• Hole circle pattern calculation
• Calculator function
• Storage for 10 tools
• Radius / diameter toggle
• Mm/inch conversion
• Easy expansion and maintenance-free operation

The WF 4.1 Milling Machine features a vertical cutter head with a +/- 90° swivel range. The set degrees are easily read on the integrated degree scale. The large quill features a stroke of 3.2"and is clamped mechanically via lever. For horizontal milling applications, merely remove the vertical cutter head via the swivel arm, shift the upper beam, and mount an outer arbor support. Conversion and setup costs are very low. All 3 axis of this machine are equipped with automatic feeds and rapid feeds. The X and Y axis are engaged and disengaged via one single directional lever. For the cross feed (Y), a separate lever has been provided at the upper beam. In addition, all axis can be manually moved using the integrated scaled hand-wheels.