Laser Cutting Machines

ACE Laser 4020 4.0 RS6

Modern, highly efficient cutting technology for large plates and tubes
  • Travel X-axis 79.5 in
  • Travel Y-axis 159 in
  • Beam power max. 4,000
Part No. 423023

Working Area
Table dimensions157x79 in
Max. work piece weight122 lbs/ft²
Axis acceleration X / Y axis10
Axis acceleration Z axis8
Travels
Travel X-axis79.5 in
Travel Y-axis159 in
Travel Z-axis4 in
Rapid Feed
X axis rapid feed392.4 fpm
Y axis rapid feed392.4 fpm
Change time at cutting table10 - 20 sec
Accuracies
Positioning accuracy0.00315 in
Repeatability0.00157 in
Laser
Shaft length1,08 ± 10% µm
Beam power max.4,000
Pulse frequency50~5k Hz
Power consumption42.91 Hp
Supply voltageAC 380V
Cutting capacity in structural steel0.71 in
Cutting capacity in stainless steel0.47 in
Cutting capacity in aluminum0.394 in
Tube cutting
Tube length, max.236 in
Machining length47 in
Chuck diameter8 in
Chucking range for square tube, min.1 in
Chucking range for square tube, max.6 in
Chucking range for round tube, min.1 in
Chucking range for round tube, max.8 in
Offcut12 in
Drive Capacity
Machine drive capacity X-axis2 Hp
Machine drive capacity Y-axis2.7 Hp
Machine drive capacity Z-axis0.3 Hp
Measures and Weights
Overall dimensions (length x width x height)473x237x99 in
Weight40,040 lbs
Part No. 423023

• Cutting capacity 5 HP • Table dimensions 157" x 79" • Automatic shuttle table • Tube cutter 236"

  • The state-of-the-art gantry-design laser cutting system with double-sided drive has a generous working range of 157 x 79 in. and is therefore suitable for the most common sheet metal sizes
  • The Y axis portal features an aluminum die-cast construction with low weight and high rigidity for excellent dynamics
  • Thermal treatment of the meticulously welded machine frame and all structural parts reliably eliminates production-related material stresses – ensuring long-lasting, precise alignment of all components. This ensures long-term and reproducible cutting edge accuracy and long machine life
  • The precision linear guides require minimal maintenance and are designed for long-lasting precision and high cutting speeds
  • High-performance rack-and-pinion gears on the X and Y axis ensure excellent dynamics and positioning accuracy
  • Powerful servo-motors on all axes
  • The cutting system features a powerful filter system and is fully enclosed to protect operators and environment
  • Cameras with a monitor provided directly at the control panel and special protective glass shields allow safe observation of the cutting process
  • An automatic shuttle table system minimizes production downtimes, since the table can be loaded and unloaded during the cutting process
  • Perpendicularity or squareness tolerance for laser cutting acc. to DIN EN ISO 9013-1

Control

  • Easy operation with user-friendly optimized interface
  • Technology database includes cutting parameters and pre-set cycles for various metals
  • The efficient processing of all cutting jobs is further supported by user-friendly software for the selection of process parameters
  • Solenoid and proportional valves regulate the gas pressures (set in the control) during the cutting process

Cutter head

  • High-quality cutter head made by Raytools with motorized focus position adjustment, integrated collision guard, and level control
  • Maintenance-free beam guide is provided by a flexible fiberoptic cable and ensures a long tool life

Laser sources

  • The ytterbium fiber laser with 5 HP beam power is made by the renowned manufacturer, Raycus, and ensures maximum cut quality and productivity
  • The maintenance-free laser source reduces maintenance and operating cost

Tube machining

  • Tube machining station designed for tubes with 6.000 mm length and 8 inch diameter
  • Two mechanical chucks precisely guide the material under the cutter head
  • Standard equipment includes CypCut-Tube software, which was design especially for tube cutting
  • Drawing data can be imported and exported via the widely used neutral IGES file format.

Preconfigured with an extensive accessory package:

  • Automatic shuttle table
  • Tube cutter 236"
  • CNC control with CypCut CAD/CAM software
  • Ytterbium fiber laser 5 HP
  • Cutter head with automatic focus positioning
  • Automatic gas console
  • Fully enclosed body with safety glass
  • Filtered exhaust system
  • Central lubrication system
  • Coolant regenerator

Laser source and cutter head: Service within 48 hours on workdays (in Germany only) - if necessary, the source or head can be replaced within this timeframe

Laser cutting systems with a cutting length of 6 m and laser power up to 8kW upon request

Cypcut Control System is a professional control software for advanced laser cutting machines.

  • The machine is programmed for 2D cutting via CypCut - a software that has been developed especially for cutting systems.
  • Geometry data can be imported from common dxf files that can be generated using a variety of software programs.
  • The software features powerful functions for cutting and nesting of contours. It also supports the user in the optimization of cutting traces using program and cut simulations.
  • Additionally, the software includes functions for the management of cut parts, plates and offcuts.

  • Tube Cutter
  • complete system with CNC-control (CypCut)
  • ytterbium fiber laser, Raycus
  • fiberoptic cable
  • high-pressure cutter head
  • laser protection booth
  • automatic changing table system
  • filter exhaust system
  • automatic gas console
  • central lubrication
  • coolant regeneration
  • CAD/CAM software (CypCut)
  • operating manual and programming instructions