Mechanics Lathes

Basic 180 Super

The highlight of the Basic series - powerful and fully equipped
  • Center width 39.37 in
  • Turning diameter over bed 14 in
  • Spindle bore 1 in
Part No. 300805

Working Area
Center width39.37 in
Turning diameter over bed14 in
Turning-Ø over support9 in
Turning diameter over gap bridge20 in
Gap bridge length8 in
Bed width8 in
Travel X-axis7 in
Travel Z1-axis4 in
Swing range of top slide± 50°
Spindle bore1 in
Spindle mountCamlock D1-4
Spindle taperMT 5
Feed X-axis0.00059 - 0.00866 in/R
Feed Z-axis0.00169 - 0.02571 in/R
Tapping, metric(37) 0.02-0.3
Tapping, withworth(28) 4-56 TPI
Tailstock quill diameter2 in
Tailstock taperMT 3
Tailstock quill stroke5 in
Tailstock traverse adjustment± 0.5 in
Drive Capacity
Motor rating main drive3.2 Hp
Main drive, continuous load2.01 Hp
Measures and Weights
Overall dimensions (length x width x height)77x32x48 in
Weight1,936 lbs
Part No. 300805

  • Cast-iron bed, heavily ribbed
  • All box ways are induction-hardened and precision-ground
  • Headstock with D1-4' mount, bore diam. 1,5", run in 2 adjustable tapered roller bearings
  • All gears are made of Cr-Ni steel, hardened, precision-ground, with oil-bath lubrication
  • Tailstock can be moved ± 0.4 in for taper turning
  • Powerful main drive (3 Hp), including base frame
  • Guides are adjustable via tapered gibs
  • Test certificate in accordance with DIN
  • Including 3-axis position indicator, fully assembled

3-axis position indicator

  • More accuracy
  • Lower error rate
  • Increased productivity
  • Resulting in valuable time savings
  • For increased productivity
  • Easy to read display
  • Operator-specific features
  • Convenient keyboard layout
  • Resolution: 0.0004 / 0.0002"
  • Default coordinates
  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Calculator function
  • Storage for 10 tools
  • Radius / diameter toggle
  • Mm/inch conversion
  • Easy expansion and maintenance-free operation
  • Display for top (Z0) and box way slide (Z1) both separate and in differential / cumulative mode for lathes

  • 3-axis position indicator
  • 3-jaw chuck Ø 6"
  • 4-jaw face plate chuck Ø 8"
  • face plate Ø 12"
  • quick change tool holder head WE
  • quick change tool holder WED 20100
  • steady and follow rests
  • coolant system
  • chip tray
  • fixed splash guard (wall)
  • chuck guard
  • foot brake pedal
  • base
  • LED work lamp
  • micrometer longitudinal stop
  • change gears
  • reducing sleeves
  • dead center
  • thread gauge
  • operating tools
  • operator instructions