Radial Drill Presses

R-V

Proven performance, quality and cost-effectiveness
Drilling capacity
Throat

  • Base, column, boom and gear head are made of premium high-quality cast
  • Major design features include a large column and a highly torsion-resistant boom
  • Boom height adjustment via a powerful motorized drive and vertical spindle
  • The boom lifting gears run in an oil-bath for maximum reliability and minimum wear
  • Advanced column swivel design with optimized clamping features maximum rigidity and minimum clamping offset
  • Swivel axis and travel axis feature extremely smooth operation to make the operator's everyday production work easier
  • The gears feature hardened and precision-ground chrome-nickel steel gears for smooth and low-noise operation
  • All gear parts are lubricated reliably via oil pump
  • The main spindle runs on precision bearings and features an automatic spindle brake
  • Quill teeth are precision-ground for a smooth feed and minimum wear
  • The drill head moves on hardened and ground guideways
  • All models feature adjustable overload clutches in the feeds
  • Adjustable boring depth stop with large, easy to read scale and Nonius
  • All operator controls are placed within reach for convenient and practical handling and quick learning
  • Powerful coolant system with coolant reservoir integrated into the machine foot
  • A large throat and high boring capacities are supported by a very rigid structural design, without compromising the ease of handling and smoothness of operation
  • The drill head features a rigid design with motorized or manual movement
  • Spindle speeds and feed velocity are hydraulically controlled for easy and safe operation
  • The drill spindle is driven via multi-disk reversing clutch to avoid excessive load peaks and for easy operation
  • Independent hydraulic clamping of head, column and boom
  • Drill head and column can be clamped/released together or separately; confirmation of operation via push button
  • Boom and column are oiled through a reliable central lubrication system

R 60 V
Drilling capacity 2.44 in
Tapping capacity, cast-iron M 52
Tapping capacity, steel M 46
Drilling depth (max.) 12 in
Machine table dimensions 94x39x8 in
Cube table dimensions 20x28x20 in
Throat 14 - 63 in
Spindle nose-to-table surface distance 14 - 49 in
Drill head travel (horizontal) 49 in
Arm stroke (vertical) 23 in
Column diameter 14 in
Speed range 38 - 2,000 rpm
Spindle mount MT 5
Feeds 0 - 0.04 in/R
Motor rating main drive 5.4 Hp
Stroke motor 2 Hp
Overall dimensions (length x width x height) 98x41.3x109.4 in
Weight 8,360 lbs
Part No. 101649
R 40 V
1.57 in
M 40
M 32
10 in
81x36x7 in
24x18x18 in
12 - 51 in
12 - 47 in
39 in
25 in
11 in
54 - 2,150 rpm
MT 4
0 - 0.02 in/R
3 Hp
1.5 Hp
81.5x33.5x95.7 in
5,060 lbs
101556
R 80 V
3.15 in
M 60
M 52
16 in
133x48x11 in
23x33x20 in
18 - 100 in
16 - 62 in
83 in
31 in
18 in
30 - 1,400 rpm
MT 6
0 - 0.05 in/R
10.1 Hp
3 Hp
141.3x49.2x139 in
16,280 lbs
101558
R 100
3.94 in
M 80
M 70
20 in
174x64x12 in
49x31x25 in
22 - 124 in
30 - 98 in
102 in
39 in
28 in
(22) 8 - 1,000 rpm
MT 6
0 - 0.13 in/R
20.1 Hp
4 Hp
188.2x64.2x185.8 in
44,000 lbs
101653

  • coolant system
  • cube table
  • LED work lamp
  • operator manual