Semi-Automatic Band Saws

HB L

Exact sawing of large and very large workpieces
Cutting capacity 90° round

  • Torsion-proof steel construction with dual-column guide – rigid and vibration absorbing
  • The saw frame features a mono-frame design for travel across large linear guides
  • Advanced hydraulic saw frame feed with new pressure regulating system (PAS) allows optimum adjustment for every sawing task: infinitely variable feed speed and cutting power control provide a wide spectrum of machining possibilities with just one saw blade type
  • The control valve features identifications and labeling for sheets, solid materials and various other material types to provide maximum user-friendly handling
  • Optical registration of the workpiece height allows fully automated empty runs in rapid feed mode for a timely optimum change-over to work feed as well as limiting the vertical saw frame travel and keeping down-times to a minimum
  • Every model of this series provides infinitely variable cutting speeds from 66 to 328 ft/min
  • Powerful, low-maintenance motors for high reliability
  • Hydraulic workpiece clamping is now standard equipment on all models
  • Pressure gauge ensures correct saw blade tension for increased blade life and lower cost
  • Removable coolant reservoir for simplified maintenance
  • Hydraulic saw blade tensioning (HB 810 L and 1020 L)

HB 380 L
Cutting capacity 90° round 15 in
Cutting capacity 90° - square 15 in
Cutting capacity 90° - flat 20x15 in
Cutting capacity 45° - round 12 in
Cutting capacity 45° - square 12 in
Cutting capacity 45° - flat 12x15 in
Cutting speed 780 - 3,900 in/min
Motor rating main drive 4 Hp
Motor rating hydraulic pump 0.7 Hp
Motor rating coolant pump 0.2 Hp
Belt dimensions 188.98x1.34x0.04 in
Overall dimensions (length x width x height) 112.204x65.354x36.614 in
Weight 2,530 lbs
Part No. 152802
HB 460 L
18 in
18 in
26x18 in
15 in
15 in
15x18 in
780 - 3,900 in/min
5.4 Hp
0.7 Hp
0.2 Hp
204.72x1.61x0.05 in
122.047x70.866x39.37 in
3,102 lbs
152806
HB 560 L
22 in
22 in
30x22 in
16 in
16 in
16x22 in
780 - 3,900 in/min
5.4 Hp
1.5 Hp
0.2 Hp
236.22x1.61x0.05 in
125.984x39.37x80.708 in
3,850 lbs
152811
HB 810 L
32 in
32 in
32x33 in
32 in
32 in
19x33 in
780 - 3,900 in/min
5.4 Hp
2 Hp
0.2 Hp
322.83x1.61x0.05 in
153.543x47.244x92.519 in
5,060 lbs
152816
HB 1020 L
40 in
40 in
40x40 in
27 in
27 in
27x40 in
780 - 3,900 in/min
10.1 Hp
3 Hp
0.2 Hp
374.02x2.13x0.06 in
177.165x66.929x108.267 in
12,892 lbs
152808

  • bimetallic band saw blade
  • hydraulic part clamping
  • hydraulic workpiece clamping
  • input / output rollers
  • automatic stroke height adjustment
  • automatic stroke height adjustment
  • coolant system
  • infinitely variable cutting speed
  • operator manual