Horizontal Hydraulic Presses

KHP 40 NC

Cost-effective bending and straightening of flat steel
Part No. 130611

Working Area
Pressure force44 t
Hydraulic pressure max.3,770 psi
Y-axis stroke10 in
Piston diam.2 in
Bending speed0.1 in/s
Return speed0.85 in/s
Table size41x24 in
Drive Capacity
Motor rating main drive2 Hp
Measures and Weights
Overall dimensions (length x width x height)62x32x54 in
Weight1,496 lbs
Part No. 130611

  • The horizontal bending and straightening press features a powerful hydraulic drive plus a stamp and a die for machining up to 6.3" wide flat material
  • The large, very rigid support table provides superior structural strength
  • Long, supporting, hardened bending die guideways with central lubrication system
  • The large mount for the bending v-block is anchored to the table for maximum rigidity
  • An adjustable side stop simplifies workpiece positioning
  • The powerful hydraulic system can be regulated via pressure and flow valves, allowing the user to control the pressing force according to requirements
  • The integrated pressure gauge provides an exact indication of the current bending force
  • All functions are shown on the touchscreen display
  • The user can select either Setup Mode or Machining Mode
  • In Setup Mode, the depth stop position and the starting point position can be determined and entered
  • Additionally, the user can individually define the point for the change-over from rapid feed to work feed
  • In Machining Mode, the operation is controlled via a safety foot switch

  • upper tool 60°, 6.3 x 3.46"
  • bending die, 3.15" opening width
  • central lubrication
  • Touchscreen operator panel with foot switch
  • side gauge 21.65"
  • operator instructions