Hydraulic Guillotine Shears

KHT H 3006 NC

The variable cutting angle makes this a powerful machine for large, small, thick and thin plates
  • Plate thickness (max.) 0.24 in
  • Working length 121 in
  • Motor rating main drive 14.8 Hp
Part No. 423250

Working Area
Plate thickness (max.)0.24 in
Working length121 in
Cutting angle0.3 - 2 deg
Hold-down13 positions
Hold-down capacity17.6 t
Back Gauge
Rear stop39 in
Feed speed X-axis3.9 in/min
Front Support Arms
Number of support arms3 positions
Length of support arms35 in
Drive Capacity
Motor rating main drive14.8 Hp
Hydraulic tank volume40 gal
Measures and Weights
Overall dimensions (length x width x height)154x82x77 in
Weight15,400 lbs
Part No. 423250

The new KHT H NC series features high machining quality and reliability, is easy to handle and provides superior cutting performance

Machine Frame

  • The machine frame is made of a high-precision, stress-relieved steel weldment and features rigid sliding block guides
  • Motorized adjustments of kerf and knife angle allow for ideal settings optimized for the sheet metal plate to be processed
  • All components were treated in a modern paint and drying system and feature two coats of paint, each coat with a minimum thickness of 60 micron

Material Support

  • The large work table features roller balls and a rigid lateral angular stop for easy handling and safe plate alignment
  • Long, sturdy support arms safely hold large plates

Hydraulics

  • Polished pistons on both hydraulic cylinders feature superior 2 micron surface grades, ensuring a long seal life
  • Cylinder bodies are forged from high-strength SAE 1040 material
  • During the cut, hydraulically regulated hold-downs ensure steady fixation of the sheet metal plate close to the cut-line

Back Gauge and Control

  • Linear guides and preloaded ball screws are mounted in a protective enclosure
  • The user-friendly NC positions the back gauge precisely for single cuts or for program runs

Equipment

  • Upper and lower knives suitable for stainless steel
  • The machine is operated via a foot pedal with emergency stop switch, and the pedal can be located wherever it is most convenient

Safety

  • Safety concept based on the latest CE standards

  • BRL 401.2 NC control unit
  • laser cut line
  • hand safety guard
  • material support table with rollers
  • foot pedal with E-stop switch
  • safety system for work area, back gauging
  • support arms (L = 39 inch) 2 pieces
  • side stop with scale and T-slot plus tilt stop (L = 39 inch)
  • blade gap adjustment
  • motorized rear stop 39 inch
  • standard upper and lower knife
  • operator manual