Hydraulic Guillotine Shears

KHT H NC

The variable cutting angle makes this a powerful machine for large, small, thick and thin plates
Plate thickness (max.)
Working length

  KHT H 3006 NCKHT H 2006 NCKHT H 2506 NCKHT H 3008 NCKHT H 3010 NCKHT H 3013 NCKHT H 4006 NCKHT H 4010 NCKHT H 4013 NC
Working Area
Plate thickness (max.)0.24 in0.24 in0.24 in0.31 in0.39 in0.51 in0.24 in0.39 in0.51 in
Working length121 in82 in102 in121 in121 in121 in161 in161 in161 in
Cutting angle0.3 - 2 deg0.3 - 2 deg0.3 - 2 deg0.3 - 2 deg0.3 - 2 deg0.3 - 2.3 deg0.3 - 2 deg0.3 - 2 deg0.3 - 2.3 deg
Hold-down13 positions10 positions12 positions16 positions16 positions16 positions20 positions20 positions19 positions
Hold-down capacity17.6 t16.5 t16.5 t22 t22 t41.8 t27.5 t27.5 t49.5 t
Throat6 in
Strokes per minute7
Table size173x23x34 in
Back Gauge
Rear stop39 in
Feed speed X-axis3.9 in/min
Front Support Arms
Number of support arms3 positions2 positions3 positions3 positions3 positions3 positions4 positions4 positions4 positions
Length of support arms35 in
Drive Capacity
Motor rating main drive14.8 Hp14.8 Hp14.8 Hp29.5 Hp29.5 Hp40.2 Hp14.8 Hp29.5 Hp40.2 Hp
Hydraulic tank volume40 gal40 gal40 gal66 gal66 gal66 gal40 gal66 gal66 gal
Measures and Weights
Overall dimensions (length x width x height)154x82x77 in111x83x71 in134x82x74 in155x80x84 in155x84x84 in156x85x89 in195x83x82 in196x86x91 in197x87x94 in
Weight15,400 lbs10,780 lbs12,540 lbs18,700 lbs20,900 lbs25,300 lbs21,340 lbs30,250 lbs36,080 lbs

The new KHT H NC series features high machining quality and reliability, is easy to handle and provides superior cutting performance

Machine Frame

  • The machine frame is made of a high-precision, stress-relieved steel weldment and features rigid sliding block guides
  • Motorized adjustments of kerf and knife angle allow for ideal settings optimized for the sheet metal plate to be processed
  • All components were treated in a modern paint and drying system and feature two coats of paint, each coat with a minimum thickness of 60 micron

Material Support

  • The large work table features roller balls and a rigid lateral angular stop for easy handling and safe plate alignment
  • Long, sturdy support arms safely hold large plates

Hydraulics

  • Polished pistons on both hydraulic cylinders feature superior 2 micron surface grades, ensuring a long seal life
  • Cylinder bodies are forged from high-strength SAE 1040 material
  • During the cut, hydraulically regulated hold-downs ensure steady fixation of the sheet metal plate close to the cut-line

Back Gauge and Control

  • Linear guides and preloaded ball screws are mounted in a protective enclosure
  • The user-friendly NC positions the back gauge precisely for single cuts or for program runs

Equipment

  • Upper and lower knives suitable for stainless steel
  • The machine is operated via a foot pedal with emergency stop switch, and the pedal can be located wherever it is most convenient

Safety

  • Safety concept based on the latest CE standards

  • BRL 401.2 NC control unit
  • motorized kerf adjustment
  • motorized back gauge
  • motorized cut angle adjustment
  • foldable finger guard
  • shadow graph display of cut line
  • support arms, 39"
  • foot pedal
  • standard upper and lower knife
  • operator instructions