Motorized Guillotine Shears
KMT B NC
Motorized Swing-Beam Shears with controlled back gauge
| KMT B 1304 NC | KMT B 2552 NC | KMT B 2554 NC | |
|---|---|---|---|
| Working Area | |||
| Structural steel plate thickness | 0.031 - 0.157 in | 0.031 - 0.079 in | 0.031 - 0.157 in |
| Working length | 51 in | 100 in | 100 in |
| Cutting angle | 2.4 deg | 1.6 deg | 1.8 deg |
| Strokes per minute (automatic mode) | 30 | ||
| Knife length | 53 in | 101 in | 101 in |
| Work table height | 33 in | ||
| Support arms | 24 in | ||
| Number of support arms | 5 positions | ||
| Back Gauge | |||
| Rear stop | 25 in | ||
| Drive Capacity | |||
| Motor rating main drive | 5.4 Hp | 5.4 Hp | 10.1 Hp |
| Measures and Weights | |||
| Overall dimensions (length x width x height) | 69x72x47 in | 119x71x49 in | 121x74x50 in |
| Weight | 2,981 lbs | 4,180 lbs | 5,500 lbs |
Machine Frame and Drive System
- The machine frame is made of a robust steel weldment treated with stress-relief annealing
- An automatic hold-down fixates the plate during cutting
- The double-edged upper and lower knives can be rotated and reused
Material Support
- The rigid side angle stop simplifies alignment of the plate to the cut line
Operation and Ergonomics
- The PLC back-gauge control with 4.3" touchscreen features a user-friendly graphic interface for quick and easy programming
- The mobile control unit features a foot switch, so the operator has both hands free
Back Gauge
- The backgauge is driven by a servo motor, which significantly improves positioning and repeatability accuracy
- A plate hold-up fixture prevents any overhang of the plate in front of the back gauge to ensure maximum accuracy and quality of every cut, even in thin plates
- Support arms are positioned via an air cylinder and lowered in sync with the cutting process
- work lamp
- operator instructions
- foot pedal
- powered rear stop
- lateral stop
- PLC control
- safety guard with power off after open door
- pneumatic sheet hold-up device
- cut-line lighting
- hold-down
- back gauge with 4.3" touchscreen
- support arms with material support rollers
- safety cover for work area near back gauge