Plasma Cutting Machines

Plasma-Jet Compact

The compact cutting machine of Kjellberg and Hypertherm
Cutting Width
Cutting length
Plasma source

  • The Plasma-Jet TrueCut series set themselves apart from the Plasma-Jet Compact series by a fully integrated machine frame that is connected to the table via a bottom plate, so the machine can be transported in one piece and requires minimum space
  • If small plasma sources (e.g. Powermax) are used, they also are stored on a shelf inside the frame
  • The standard equipment includes the same high-quality components as the larger series: dual-drive bridge, high-quality linear guides, dynamic AC servo-drives, helical gears, automatic torch height control, magnetic cutter head holder serving as collision guard, optimum cutting data preset in the control.
  • These machines provide the same excellent cutting performance as the Plasma-Jet TrueCut series

Plasma-jet Compact 1530 K
Cutting Width 59 in
Cutting length 118 in
Table height 24 in
Table load capacity 84 lbs/ft²
Rapid feed 709 in/min
Weight (without plasma source) 4,950 lbs
Part No. 144001
Plasma-Jet Compact 2040 K
79 in
157 in
24 in
84 lbs/ft²
709 in/min
7,810 lbs
144002
Plasma-Jet Compact 3060 K
118 in
236 in
24 in
84 lbs/ft²
709 in/min
17,600 lbs
144003
Plasma-Jet Compact 1530 H
59 in
118 in
24 in
84 lbs/ft²
709 in/min
4,950 lbs
144011
Plasma-Jet Compact 2040 H
79 in
157 in
24 in
84 lbs/ft²
709 in/min
7,810 lbs
144012
Plasma-Jet Compact 3060 H
118 in
236 in
24 in
84 lbs/ft²
709 in/min
17,600 lbs
144013

  • Table is prepared for filter system (automatic closure control)
  • Panasonic servo-motors and drives
  • Automatic torch height control with Hypertherm THC sensor
  • Cutter torch with magnetic coupling and crash sensor
  • Hypertherm Edge Connect CNC Unit
  • 15” touchscreen by ELO
  • Ethercat-E
  • Laser pointer
  • Libellula Wizard PRO
  • Libellula.CAD 2D