Engine Lathes

Sinus D

High rigidity and power with perfect control for a wide variety of applications
Workpiece length (max.)
Turning diameter over bed

  Sinus 330/1500 DSinus 330/2000 DSinus 330/3000 DSinus 400/2000 DSinus 400/1500 DSinus 400/3000 D
Working Area
Workpiece length (max.)59 in79 in118 in79 in59 in118 in
Turning diameter over bed26 in26 in26 in31 in31 in31 in
Turning-Ø over support17 in17 in17 in22 in22 in22 in
Turning diameter without gap bridge35 in35 in35 in41 in41 in41 in
Gap bridge length13 in
Bed width16 in
Travels
Travel X-axis14.5 in14.5 in14.5 in16.5 in16.5 in16.5 in
Travel Z1-axis9 in
Swing range of top slide45° 45° 45° 70° 70° 70°
Headstock
Spindle speed(16) 25 - 1,600 rpm
Spindle bore4 in
Spindle mountD1-8
Spindle taperMT 5
Rapid Feed
Rapid feed X-axis78.74 in/min
Rapid feed Z-axis157.48 in/min
Feed
Feed X-axis(25) 0.00087 - 0.02913 in/R
Feed Z-axis(25) 0.00173 - 0.05827 in/R
Tapping
Tapping, metric(54) 0.45 - 120 mm
Tapping, diametric(42) 0.88 - 160 DP
Tapping, module(46) 0.25 - 60 mm
Tapping, withworth(54) 7/16 - 80 TPI
Tailstock
Tailstock quill diameter4 in
Tailstock taperMT 5
Tailstock quill stroke9 in
Tailstock traverse adjustment ±0.5 in in ± 0.5 in in± 0.5 in in± 0.4 in in± 0.4 in± 0.4 in
Drive Capacity
Motor rating main drive10.1 Hp
Measures and Weights
Overall dimensions (length x width x height)127x49x63 in147x49x63 in186x49x63 in148x45x76 in128x45x45 in187x45x76 in
Weight6,160 lbs6,380 lbs7,260 lbs7,700 lbs7,084 lbs8,514 lbs

  • Removable bridge for machining of large parts
  • High accuracy and low-noise operation even at high cutting power
  • Heavy and large bed
  • Hardened guide ways (>HB 400)
  • 4 inch spindle capacity for machining of large parts
  • Manual central lubrication
  • clutch for soft startup with heavy parts
  • Automatic lubrication of headstock and main drive
  • Protected lead screw
  • Overload protection for feed shaft and lead screw
  • Support moves in linear and cross directions via rapid feed

3-axis position indicator

  • More accuracy
  • Lower error rate
  • Increased productivity
  • Resulting in valuable time savings
  • For increased productivity
  • Easy to read display
  • Operator-specific features
  • Convenient keyboard layout
  • Resolution: 0.0004 / 0.0002"
  • Default coordinates
  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Calculator function
  • Storage for 10 tools
  • Radius / diameter toggle
  • Mm/inch conversion
  • Easy expansion and maintenance-free operation
  • Display for top (Z0) and box way slide (Z1) both separate and in differential / cumulative mode for lathes

  • 3-axis position indicator
  • 3-jaw chuck Ø 13"
  • 4-jaw chuck (15" diam.) face plate Ø 23"
  • face plate Ø 20"
  • dog plate
  • quick tool changer head WD
  • quick change tool holder WD1D 40180
  • fixed splash guard (wall)
  • coolant system
  • steady and follow rests
  • taper turning unit
  • chuck guard
  • LED work lamp
  • reducing sleeves
  • dead center
  • operating tools
  • operator instructions