Universal Milling Machines


Rigid knee-and-column milling machine with servo drive feed and universal swivel head
  • Table dimensions 52x14 in
  • Motor rating horizontal spindle 7.4 Hp
  • Motor rating vertical spindle 5.4 Hp
Part No. 362750

Working Area
Table dimensions52x14 in
Table load capacity (max.)1,100 lbs
Number of T-slots3 positions
T-slot (width x spacing)0.71x3.15 in
Travel X-axis29.5 in
Travel Y-axis11 in
Travel Z-axis15 in
Milling Head
Speed range(12) 60 - 1,750 rpm
Spindle mountISO 50
Swivel angle360°
Upper beam travel22 in
Spindle center-to-table distance7 - 22 in
Rapid Feed
Rapid feed X-axis47.24 in/min
Rapid feed Y-axis31.5 in/min
Rapid feed Z-axis23.62 in/min
Horizontal Milling Spindle
Spindle speed (horizontal)(12) 60 - 1,800 rpm
Spindle mountISO 50
Throat15 - 37 in
Feed speed X-axis1.1811 - 29.5275 in/min
Feed speed Y-axis1 - 20 in/min
Feed speed Z-axis0.5906 - 14.7638 in/min
Drive Capacity
Motor rating horizontal spindle7.4 Hp
Motor rating vertical spindle5.4 Hp
Motor rating X axis feed2 Hp
Motor rating Y axis feed2 Hp
Motor rating Z axis feed2 Hp
Motor rating coolant pump0.1 Hp
Measures and Weights
Overall dimensions (length x width x height)71x83x79 in
Weight6,347 lbs
Part No. 362750

  • Extremely rigid machine bed made of high-strength HT-200 cast-iron with heavy ribbing
  • Precision-ground guideways with hardened surfaces for long term accuracy and wear resistance
  • Large work area of 52 x 14 inch and up to 1102 lb table load capacity
  • Quiet, precision-made headstock gears with hardened and ground gears
  • Universal cutter head swivels on 2 planes - quick change-over from horizontal to vertical machining
  • By combining both swivel levels, almost any angle can be set
  • Powerful axis servo-motors allow infinite adjustment of feeds on all 3 axes
  • Telescoping covers on the Y axis protect the feed spindle
  • Control panel swings out to either side and features an integrated position indicator
  • 7 HP main drive guarantees high torque
  • Coolant system and chip tray are included

3-axis position indicator

  • More accuracy
  • Lower error rate
  • Increased productivity
  • Resulting in valuable time savings
  • For increased productivity
  • Easy to read display
  • Operator-specific features
  • Convenient keyboard layout
  • Resolution: 0.0004 / 0.0002"
  • Default coordinates
  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Calculator function
  • Storage for 10 tools
  • Radius / diameter toggle
  • Mm/inch conversion
  • Easy expansion and maintenance-free operation

  • 3-axis position indicator
  • reducing sleeve ISO 50 / MT4
  • milling arbors (1 in, 1.23 in)
  • outer arbor support for horizontal milling
  • ISO 50 collet chucks incl. collets up to 0.6 inch (8 pieces)
  • coolant system
  • work lamp
  • chip tray
  • draw bar
  • operating tools
  • operator instructions