Radial Drill Presses

R-V

Proven performance, quality and cost-effectiveness
Drilling capacity
Throat

  R 60 VR 40 VR 80 VR 100
Working Area
Drilling capacity2.44 in1.57 in3.15 in3.94 in
Tapping capacity, cast-ironM 52 M 40 M 60 M 80
Tapping capacity, steelM 46 M 32 M 52 M 70
Drilling depth (max.)12 in10 in16 in20 in
Machine table dimensions94x39x8 in81x36x7 in133x48x11 in174x64x12 in
Cube table dimensions20x28x20 in24x18x18 in23x33x20 in49x31x25 in
Throat14 - 63 in12 - 51 in18 - 100 in22 - 124 in
Spindle nose-to-table surface distance14 - 49 in12 - 47 in16 - 62 in30 - 98 in
Drill head travel (horizontal)49 in
Arm stroke (vertical)23 in25 in31 in39 in
Column diameter14 in11 in18 in28 in
Headstock
Speed range38 - 2,000 rpm54 - 2,150 rpm30 - 1,400 rpm(22) 8 - 1,000 rpm
Spindle mountMT 5 MT 4 MT 6 MK 6
Feed
Feeds0 - 0.04 in/R0 - 0.02 in/R0 - 0.05 in/R0 - 0.13 in/R
Drive Capacity
Motor rating main drive5.4 Hp3 Hp10.1 Hp20.1 Hp
Stroke motor2 Hp1.5 Hp3 Hp4 Hp
Measures and Weights
Overall dimensions (length x width x height)99x42x110 in82x34x96 in142x50x139 in189x65x186 in
Weight8,360 lbs5,060 lbs16,280 lbs44,000 lbs
Travels
Drill head travel (horizontal)--39 in83 in102 in

  • Base, column, boom and gear head are made of premium high-quality cast
  • Major design features include a large column and a highly torsion-resistant boom
  • Boom height adjustment via a powerful motorized drive and vertical spindle
  • The boom lifting gears run in an oil-bath for maximum reliability and minimum wear
  • Advanced column swivel design with optimized clamping features maximum rigidity and minimum clamping offset
  • Swivel axis and travel axis feature extremely smooth operation to make the operator's everyday production work easier
  • The gears feature hardened and precision-ground chrome-nickel steel gears for smooth and low-noise operation
  • All gear parts are lubricated reliably via oil pump
  • The main spindle runs on precision bearings and features an automatic spindle brake
  • Quill teeth are precision-ground for a smooth feed and minimum wear
  • The drill head moves on hardened and ground guideways
  • All models feature adjustable overload clutches in the feeds
  • Adjustable boring depth stop with large, easy to read scale and Nonius
  • All operator controls are placed within reach for convenient and practical handling and quick learning
  • Powerful coolant system with coolant reservoir integrated into the machine foot
  • A large throat and high boring capacities are supported by a very rigid structural design, without compromising the ease of handling and smoothness of operation
  • The drill head features a rigid design with motorized or manual movement
  • Spindle speeds and feed velocity are hydraulically controlled for easy and safe operation
  • The drill spindle is driven via multi-disk reversing clutch to avoid excessive load peaks and for easy operation
  • Independent hydraulic clamping of head, column and boom
  • Drill head and column can be clamped/released together or separately; confirmation of operation via push button
  • Boom and column are oiled through a reliable central lubrication system

  • coolant system
  • cube table
  • LED work lamp
  • operator manual